Front TV (head-banger)

I removed the frame around the TV, and pulled it out.

Then I unscrewed the support base from the header and the TV housing could be removed. I took out all of the staples holding the leather covering to this housing and set the leather covering aside.

I used ¼” plywood to make a “cabinet bottom” for the hole left by the TV. I stretched the leather I had previously set aside over the plywood, stapled it down and trimmed the excess.

I used another piece of ¼” plywood on the inside of the opening to create a secure bottom to my cabinet and then screwed the leather covered plywood over that.

I repurposed the framing that was around the TV originally to make a frame for a set of doors.

Attached the doors I had previously build and viola, new cabinet and storage space

What a view!!!! And most importantly, no more banging my head! And that completes our remodel!